AOC Palatal? P61TV-956 N o-phenylene unsaturated polyester resin

Home " Product Center " AOC " AOC Palatal? P61TV-956 N o-phenylene unsaturated polyester resin

Phthalic Acid Resins for Hand Layup and Spraying
Components based on Palatal P61TV-956 N have good non-stick properties and good curability when thin laminating in high humidity environments.

mileage

Good mechanical properties.

Fast impregnation

Good non-stick.

LR and CCS certified.

Chemical/Physical Properties

Palatal? P 61 TV-956 N is a pre-promoted, thixotropic unsaturated polyester resin on the basis of phthalic acid and standard diols dissolved in styrene. The resin has low viscosity and high reactivity. A color change system has been introduced.

appliance

Palatal P61TV-956N is ideally suited for both hand lay-up and spray processes. It impregnates the reinforcement quickly during lay-up and does not lose it vertically. Palatal? P 61 TV-956N has good mechanical properties. Suitable for the marine, bathroom, leisure and cabin industries.
Palatal? P61TV-956N is approved for shipbuilding by China Classification Society (CCS) and Lloyd's Register (LR).

Product Specification

causality	(be) worth	unit (of measure)	Test Standards
exterior condition	turbidity		TM 2265
Viscosity@23℃	180-220	mPa.s	TM 2013
Solid content, infrared drying	54-59	%	TM 2033
acid value	8-15	mgKOH/g	TM 2401
Gel time (25°C to 35°C)	20-38	minutes	TM 2625

note
TM2625: 2.0 g Butanox? M50 added to 100 g resin.

Typical Properties of Liquid Resins

causality	(be) worth	unit (of measure)	Test Standards
flash point	33	°C	TM 2800
Stability, no initiator, dark, 25 °C	3	moon	-

Typical Properties of Resin Casting Body

causality	(be) worth	unit (of measure)	Test Standards
tensile strength	65	MPa	ISO 527-2
Tensile modulus of elasticity	3.6	GPa	ISO 527-2
Elongation at break	5.0	%	ISO 527-2
bending strength	120	MPa	ISO 178
Bending modulus of elasticity	3.6	GPa	ISO 178
Heat Distortion Temperature (HDT)	68	°C	ISO 75 Ae
Unnotched impact strength	12	kJ/m2	ISO 179

note
Curing Conditions: Add 2.0 g of Butanox M50 to 100 g of resin to cure. Cure at room temperature for 24 hours, then at 80 °C for 24 hours.

Processing Guide

MEKP is recommended as curing agent. The dosage is 1%~2.5%. Users can adjust the dosage according to the ambient temperature and process time.

Thixotropic resin. We recommend gentle stirring before use.

Application Guidelines

Products cured at room temperature should be post-cured for optimum performance. The product should be cured at room temperature for 24 hours prior to post-curing treatment. Prior to assembly, such as drilling treatments, it is best to leave the product at room temperature for 24-48 hours.

We offer our products for sale in mainland China (in compliance withRegulations on the Administration of Internet Sales of Hazardous Chemicals ) and some of the products of the global export services, providing dangerous goods packaging containers, "outbound dangerous goods transportation packaging use identification results list", "outbound cargo inspection and quarantine" and other export procedures.
We have rich experience in exporting hazardous chemicals, covering Class 5.2 (including products for cold chain transportation), Class 3 and Class 9 dangerous goods. Our services have been extended to more than 40 countries worldwide, including the Middle East, Central Asia and Eastern Europe.

AOC Palapreg? P 171-909 SMC/BMC o-phenylene-based resin

Palapreg? P 171-909 is an o-phenylene-based SMC/BMC molding resin designed for SMC/BMC production processes. It offers a good price/performance ratio for applications in automotive, electrical and building materials. Typical applications Palapreg? P 171-909 is designed for SMC/BMC production. Palapreg? P 171-909 has good flow properties for normal SMC/BMC products and is more suitable for injection molded BMCs and larger, complex products. Transportation products: Front circumference

Read More "

AOC Palatal? P 6-901 o-phenylene unsaturated polyester resin

O-phenylene unsaturated polyester resin Composite products based on Palatal? P 6-901 have good mechanical and thermal properties Characteristics Product properties Palatal? P 6-901 is a general-purpose o-phenylene unsaturated polyester resin with medium viscosity and high reactivity. Typical applications Palatal? P 6-901 is suitable for hand lay-up, winding and other processes. It has high mechanical strength and good heat and chemical resistance, and is widely used in a variety of non-reinforced as well as glass fiber reinforced products, such as pipes, tanks, ships, automotive parts and other structural components. Product index Performance Value Unit Test method

Read More "

AOC Palatal? P 65-972 o-phenylene unsaturated polyester resin

Composite products based on Palatal? P 65972 resin offer good mechanical strength, good heat resistance and easy pultrusion processing. Benefits Chemical/Physical Properties Palatal? P 65-972 is an unsaturated polyester resin based on phthalic acid and standard diols dissolved in styrene. The resin has low viscosity and high reactivity. Applications Palatal?P 65-972 is designed for a wide range of FRP moldings with high resistance to heat distortion. Recommended for pultrusion, fiber-wound, RTM, high filler and polymer concrete. Product specification Attributes Values Single

Read More "

AOC Palatal P 61TV-956L Pre-promoted thixotropic o-phenylene unsaturated polyester resin

Properties P 61TV-956L is a pre-promoted, thixotropic o-phenylene unsaturated polyester resin with low viscosity and high reactivity, suitable for hand lay-up and spraying processes. The resin contains a low styrene evaporator (LSE) and a color change indicator for the curing process. It has good wettability to glass fibers and excellent handling properties.P 61TV-956L has excellent mechanical properties and good water resistance. Main applications P 61TV-956L is widely used in hand lay-up and spraying processes. P 61TV-956L has low viscosity and very good wetting of glass fibers.P 61TV-956L

Read More "

AOC Synolite 0544-I-2 Pre-promoted thixotropic o-phenylene unsaturated polyester resin

Properties Synolite 0544-I-2 is a pre-promoted, thixotropic o-phenylene unsaturated polyester resin with low viscosity and medium reactivity. Main Applications Synolite 0544-I-2 has excellent mechanical properties, with elongation at break similar to most glass fiber reinforced materials, and can be used for structural parts where high mechanical properties are required. It is suitable for both hand lay-up and injection molding processes. 0544-I-2 has been certified by Lloyd's Register of Shipping as a marine resin. 0544-I-2 has been heat stabilized to withstand tropical temperatures and is suitable for use in hot water.

Read More "

AOC Palatal P 50-952TV is a pre-promoted thixotropic o-phenylene unsaturated polyester resin.

Properties P 50-952TV is a pre-promoted, thixotropic o-phenylene unsaturated polyester resin with low viscosity and high reactivity, suitable for hand lay-up and spraying. P 50-952TV has good infiltration of glass fibers and excellent handling properties, excellent mechanical properties and high impact strength. Main Applications Brylon P 50-952TV is widely used in hand lay-up and injection molding processes. P 50-952TV has low viscosity and very good infiltration of glass fiber, mainly used in shipbuilding industry, P 50-952TV has passed the inspection and approval of China Classification Society, it has good

Read More "

Be ready Worked with us?

We are committed to provide customers with customizable products and solutions to win the market through professional technology, fast process, efficient implementation, and become the best service provider in the new material industry.