AOC Palatal?A400TV 957 S Low Shrinkage m-phenylene unsaturated polyester resin

Home " Product Center " AOC " AOC Palatal?A400TV 957 S Low Shrinkage m-phenylene unsaturated polyester resin

Low Shrinkage Isophthalic Resins for Hand Layup and Spray Applications
Palatal A400TV-957S based assemblies offer excellent dimensional stability and low fiber printing.

mileage

Low shrinkage.

Excellent non-stick properties.

Good heat resistance

Good hydrolysis resistance

CCS Class 1 Resin Certification

Chemical/Physical Properties

Palatal?A 400TV-957 S is a pre-promoted, thixotropic unsaturated polyester resin on the basis of isophthalic acid and standard diols dissolved in styrene. The resin has low viscosity and medium reactivity. A color change system has been introduced.

appliance

Palatal? A 400 TV-957 S is ideally suited for hand lay-up and spraying techniques. It impregnates the reinforcement easily during lay-up and does not lose from the inclined laminate. It is specialized for hulls, decks, tanks, pipes, etc. of ships in contact with water. It has low exotherm, low shrinkage and good non-stick properties. Palatal? A 400 TV-957S has good mechanical properties and high HDT. Palatal? A 400 TV-957 has been recognized by China Classification Society (CCS) as a Class 1 resin for shipbuilding.

Product Specification

causality	numerical value	unit (of measure)	Test Methods
exterior condition	turbidity	-	TM_2265
Solids content, Infrared drying	52-58	%	TM_2033
acid value	11-18	mgKOH/g	TM_2401
Viscosity @23℃	180-250	mPa.s	TM_2013
Gel time (25°C to 35°C)	40-70	minutes	TM_2625

note
TM2625: 1.5 g of Butanox? M50 in 100 g of resin.

Typical Properties of Liquid Resins

causality	numerical value	unit (of measure)	Test Methods
flash point	33	°C	TM 2800
Stability (no initiator added), dark environment, 25°C	3	moon	-

Typical properties of unfilled castings

causality	numerical value	unit (of measure)	Test Methods
tensile strength	65	MPa	ISO 527-2
tensile modulus	3.6	GPa	ISO 527-2
Elongation at break	2.4	%	ISO 527-2
bending strength	110	MPa	ISO 178
bending modulus	3.7	GPa	ISO 178
Heat Distortion Temperature (HDT)	95	°C	ISO 75 Ae
Unnotched impact strength	10	kJ/m2	ISO 179

note
Curing conditions: Cure by adding 1.5 g of Butanox M50 to 100 g of resin. After 24 hours at room temperature, the resin is then post-treated and cured at 80°C for 24 hours.

Processing Guide

MEKP is recommended as curing agent. The dosage is 1%~2.5%. Users can adjust the dosage according to the ambient temperature and process time.

The laminate has good non-stick properties. Once secondary lamination is required, we recommend sanding prior to secondary processing.

Thixotropic resin. We recommend gentle stirring before use.

Application Guide

Room temperature cured products should be post cured for optimum performance. The product should be allowed to cure at room temperature for 24 hours prior to post-curing. Prior to assembly, if drilling, it is best to leave the product at room temperature for 24-48 hours.

We offer our products for sale in mainland China (in compliance withRegulations on the Administration of Internet Sales of Hazardous Chemicals ) and some of the products of the global export services, providing dangerous goods packaging containers, "outbound dangerous goods transportation packaging use identification results list", "outbound cargo inspection and quarantine" and other export procedures.
We have rich experience in exporting hazardous chemicals, covering Class 5.2 (including products for cold chain transportation), Class 3 and Class 9 dangerous goods. Our services have been extended to more than 40 countries worldwide, including the Middle East, Central Asia and Eastern Europe.

AOC Palatal A 400-976A m-phenylene food-grade unsaturated polyester resin

Properties Balance Material A 400-976A is a m-phenylene type unsaturated polyester resin with medium viscosity and high reactivity. Belomate A 400-976A is a food grade resin, which meets the requirements of "Hygienic Law of the People's Republic of China on Unsaturated Polyester Resin and Glass Reinforced Plastic Products for Food Containers and Packaging Materials" (GB 13115-1991). Main applications Brylon A 400-976A is suitable for pipes, tanks, automobile parts, ships, counter molds and other molded products requiring high mechanical properties. It can be used in hand lay-up, winding, RTM and pultrusion, casting grid and other molding processes. Product Specification Performance Range Units Testing

Read More "

AOC Palatal A 400-901 m-phenylene unsaturated polyester resin

Product Properties Brylon A 400-901 is a general-purpose m-phenylene unsaturated polyester resin with medium viscosity and high reactivity. Main applications Brylon A 400-901 is suitable for casting products and FRP products requiring high mechanical strength and high temperature and corrosion resistance, and is used in artificial stone, handicrafts, gratings, pipes, ships, automobile parts, etc. It has low fracture sensitivity and high fatigue life. The products have low fracture sensitivity and thus have high fatigue life. It is especially suitable for products in contact with water, especially seawater. It has high resistance to water and chlorine. The main molding processes are hand-layup, winding, casting grid and pultrusion. Product Specification Performance Indicator Range Unit Test Standard Appearance

Read More "

AOC Palatal? A 400-972 m-Phenylunsaturated Polyester Resin for FRP Structural Layers

Isophthalic Polyester Resin for FRP Structural Layers Components based on Palatal? A 400-972 have excellent mechanical and electrical properties with good stiffness, dimensional stability and impact resistance. Benefits Chemical/Physical Properties Palatal? A 400-972 is an unsaturated polyester resin based on isophthalic acid and standard diols dissolved in styrene. The resin has medium viscosity and high reactivity. Main Applications / Main Properties Palatal? A 400-972 is suitable for a wide range of applications. Molded products made from this resin have excellent mechanical properties, high resistance to heat distortion, and high

Read More "

AOC Palatal A 400-972 m-phenylene unsaturated polyester resin

Properties Brylon A 400-972 is a m-phenylene unsaturated polyester resin with medium viscosity and high reactivity. Main applications Brylon A 400-972 is suitable for pipes, tanks, automotive parts, ships, counter molds and other molded products requiring high mechanical properties. It can be used in hand lay-up, winding, RTM, pultrusion, casting grid and other molding processes. Product Specification Performance Range Unit Test Standard Appearance Clear - TM 2265 Viscosity 23°C 400-550 mPa.s TM 2013 Acid Value 8-14 mgKOH/g TM 2401 Solids 55

Read More "

Be ready Worked with us?

We are committed to provide customers with customizable products and solutions to win the market through professional technology, fast process, efficient implementation, and become the best service provider in the new material industry.