AOC Palapreg? P 145-01 Pure Unsaturated Polyester Resin with Maleic Acid

Home " Product Center " AOC " AOC Palapreg? P 145-01 Pure Unsaturated Polyester Resin with Maleic Acid

Pure maleated unsaturated polyester resins for low shrinkage applications
Palapreg? P 145-01 is intended for use in SMC and BMC production. It has good compatibility with low profile additives and can be used in low shrinkage SMC/BMC applications for very good surface quality. Molded parts made with Palapreg? P 145-01 show excellent uniform coloration.

vantage

Very good surface quality (low shrinkage)

High gloss parts for applications where appearance is critical

Excellent and even coloring

Main application areas

Construction and Infrastructure, Electrical, Transportation.

Product Specification

causality	numerical value	unit (of measure)	TM
exterior condition	limpid	-	2265
solid	65.5 - 67.5	%	2033
stickiness	1500 - 1800	mPa.s	2013
acid value	15 - 18	mg KOH/g	2401
Gel time	75 - 103	unit of angle or arc equivalent one sixtieth of a degree	2261
peak time	115 - 145	unit of angle or arc equivalent one sixtieth of a degree	2261
peak temperature	265 - 295	°C	2261
water content	6 - 14	ppm	2350

Viscosity: Z2/100/23°C; Conditions: 100 g resin, 1 g tert.Butylperoxybenzoate at 130°C; Reactivity measured by adding 1 g tert.Butylperoxybenzoate to 100 g resin.

Typical Properties of Liquid Resins

Property	Value	Unit	TM
Density	1100	kg/m3	2160
Flash point	33	°C	2800
Stability	Solid dark 25°C	3 months

Typical properties of unfilled castings

causality	numerical value	unit (of measure)	TM
tensile strength	61	MPa	ISO 527-1
tensile modulus	39	GPa	ISO 527-1
Elongation at break	24	%	ISO 527-1
HDT (Heat Distortion Temperature)	133	°C	ISO 75 Ae

Application Guide

Palapreg? P 145-01 is typically used for standard SMC/BMC processing or in conjunction with Palapreg? LPAs for the preparation of low shrinkage/low profile SMC and BMC. Typically, the ratio of Palapreg? P 145-01 to polymer solution is 60:40, but this can be adjusted if required. Depending on the size of the molded part, it is recommended to add 300 to 600 ppm of p-phenylenedione (calculated as UP-resin plus LPAs) to the system.

We offer our products for sale in mainland China (in compliance withRegulations on the Administration of Internet Sales of Hazardous Chemicals ) and some of the products of the global export services, providing dangerous goods packaging containers, "outbound dangerous goods transportation packaging use identification results list", "outbound cargo inspection and quarantine" and other export procedures.
We have rich experience in exporting hazardous chemicals, covering Class 5.2 (including products for cold chain transportation), Class 3 and Class 9 dangerous goods. Our services have been extended to more than 40 countries worldwide, including the Middle East, Central Asia and Eastern Europe.

AOC Palapreg? P 171-909 SMC/BMC o-phenylene-based resin

Palapreg? P 171-909 is an o-phenylene-based SMC/BMC molding resin designed for SMC/BMC production processes. It offers a good price/performance ratio for applications in automotive, electrical and building materials. Typical applications Palapreg? P 171-909 is designed for SMC/BMC production. Palapreg? P 171-909 has good flow properties for normal SMC/BMC products and is more suitable for injection molded BMCs and larger, complex products. Transportation products: Front circumference

Read More "

AOC Palatal? EL-901 Saturated Polyester SMC/BMC Low Shrinkage Additive

Low shrinkage additive for saturated polyester type SMC/BMC Palapreg? EL-901 is a special low shrinkage additive for SMC/BMC with A-grade surface. The shrinkage of the product can be controlled to zero or negative shrinkage, which is suitable for all kinds of products that require shrinkage or surface quality. Characteristics and Properties Typical Applications Palapreg? EL-901 is ideally suited for Grade A surface products or products with high surface brightness. Palapreg? EL-901 has excellent heat, water, and weather resistance, and is suitable for a wide range of products that require zero or negative shrinkage or surface quality.

Read More "

AOC Palapreg? P 133-952 High Gloss Surface SMC/BMC Molding Resin

Palapreg? P 133-952 is a maleic anhydride type unsaturated polyester resin with an excellent surface finish. It is mainly used for products requiring surface quality and gloss, as well as good water/weather resistance. Examples include bathroom products, automotive panels and medical devices. Characteristics and Properties Typical Applications Palapreg? P 133-952 is a resin designed for low-profile and Class A surface SMC formulations. In combination with low shrinkage additives for Class A surfaces, such as H 892-02, high surface quality molded products can be achieved. Product Specifications Performance Values Single

Read More "

AOC Palapreg H 892-02 Low Shrinkage Additive for SMC/BMC with Grade A Surface

Product Properties Brylon H 892-02 is a low shrinkage additive for Grade A surface SMC / BMC. It has very low resin viscosity and excellent system shrinkage control. Main Applications H 892-02 is well suited for A-grade surface products or products with high surface brightness. Shrinkage can be controlled to zero or negative, making it suitable for a wide range of products that require shrinkage or surface quality. At the same time, H 892-02 has very good heat resistance, water resistance and weather resistance, which can meet the requirements of some special products. Automobile parts: all kinds of automobile exterior parts Electronic and electrical appliances: motor molded parts, precision injection parts Others:

Read More "

AOC PALAPREG? H 852-03 Low Shrinkage Additive for SMC/BMC with Low Surface Bump Float Grade A

Chemical/Physical Properties Palapreg? H 852-03 is a modified saturated polyester solution dissolved in styrene. Main applications For example, the combination of Palapreg? P18-03 and Palapreg? H852-03 is recommended for the production of low relief SMC/BMC parts with high surface quality (class A). The formulation can be easily thickened with magnesium oxide. Due to its excellent flowability in SMC, Palapreg? H 852-03 is well suited for low pressure applications. The use of aluminum hydroxide as a filler allows the production of molded products with high flame retardancy. Criteria Comments

Read More "

AOC PALAPREG? P 17-02 Low Bump Float SMC/BMC Molding Resin

Chemical/Physical Properties Palapreg? P 17-02 is an unsaturated polyester resin derived from phthalic acid and standard ethylene glycol, dissolved in styrene. Palapreg? P 17-02 has medium viscosity and high reactivity. Main applications Palapreg P 17-02 is used in the production of SMC and BMC. It is mainly used with Palapreg polymer components for SMC/BMC applications with low shrinkage or low bulge. The resin is easy to thicken easily by magnesium oxide. Product specification as delivered Attributes Range Units Test method Viscosity, 23°C 1300 -

Read More "

Be ready Worked with us?

We are committed to provide customers with customizable products and solutions to win the market through professional technology, fast process, efficient implementation, and become the best service provider in the new material industry.