A 75% solution of 1,1-tert-butylperoxy-3,3,5-trimethylcyclohexane (CAS#6731-36-8) diluted with a highly active aliphatic hydrocarbon or odorless mineral oil.

Technical data:

• Appearance: colorless liquid
• Content: approx. 75% w/w
• Active Oxygen: approx. 7.94% w/w
• Desensitizer: High-boiling aliphatic hydrocarbons (boiling point >170°C)
• Density (20°C): approx. 0.88 g/cm3
• Viscosity (20°C): approx. 8 mPa-s
• Refractive index at 20°C: approx. 1.435
• SADT: approx. 60°C
• Refrigeration stability: below -25°C
• Recommended storage temperature: below 40°C
• Stability at 25°C: 3 months
• Half-life data: 10 hours/1 hour/1 minute (0.1 m/benzene): 95°C/114°C/155°C

Applications:

• Ethylene: Initiator for high pressure ethylene polymerization, used with other peroxides of different activity. Temperature range: 200-250°C.
• Styrene: Initiator for the polymerization of styrene in bulk or suspension systems. Temperature range: 100-140°C. Recommended dosage: 0.02-0.08%.
• Other monomers: Used as initiator for vinyl acetate and (meth)acrylate. Temperature range: 90-130°C. Recommended dosage: 0.04-0.8%.

Storage:

• Observe the recommended storage temperature range to maintain the quality and utility of the product and for safety reasons.
• Comply with local regulations, requirements and your insurance provider's safety recommendations.

Standard Packaging:

• Product is packaged in 20 liter drums with a net weight of 30 lbs. Standard pallet quantity is 900 lbs (30 containers).

Security and handling:

• Please refer to our Safety Data Sheet. This material is highly hazardous and self-reactive.
• Avoid heating above maximum recommended storage temperatures and limits.
• Conduct security reviews in accordance with process security management techniques.

REACH:

• The material is registered under REACH.

Disclaimer:

• The information and technical advice provided is based on our current knowledge and experience of in-house testing of local raw materials and is intended to provide information about our products and applications.
• The information should not be construed as a guarantee of specific performance of the products described or of their suitability for a particular application, nor should it be regarded as providing complete instructions for use.
• The information does not provide a guarantee for the product and shelf-life characteristics, nor does it provide any liability or other legal responsibility for any intellectual property rights, in particular patents.
• We reserve the right to make any changes based on technological advances or further developments.
• The application and use of products based on our technical recommendations are beyond our control and are the sole responsibility of the user. The user is obliged to carefully inspect and test incoming goods to verify their suitability for the intended application.