AOC SYNOLITE 8388-P-1 Low Viscosity Pre-Promoted Thixotropic DCPD Type Unsaturated Polyester Resin

Home " Product Center " AOC " AOC SYNOLITE 8388-P-1 Low Viscosity Pre-Promoted Thixotropic DCPD Type Unsaturated Polyester Resin

Chemical/Physical Properties

Synolite? 8388-P-1 is a low viscosity, pre-accelerated, promoted, thixotropic, medium reactivity DCPD polyester resin. LSE systems are incorporated.
Synolite? 8388-P-1 does not contain monomer amines.

major application

Synolite? 8388-P-1 was developed for hand lay-up and spray applications to produce high performance structural laminates.

Main characteristics

Synolite? 8388-P-1 combines good mechanical properties with optimal processability. The resin exhibits very good fiber wetting and impregnation properties.
Thick laminates can be manufactured in a single run due to low exotherm, good full cure and relatively low shrinkage. Optimized LSE systems have been developed to achieve excellent low styrene emissions. Color change systems facilitate spray applications. Synolite? 8388-P-1 can be used with powder and emulsion bonding pads.

license

Synolite? 8388-P-1 has been certified in accordance with DNV Classification and Provisional Rules for the Classification of Ships 1997, Level 2;
Det Norske Veritas Rules for the Classification of High Speed and Light Vessels, Class 2. Certificate No. K-1720

Product specifications at the time of delivery

causality	realm	unit (of measure)	TM
exterior condition	turbidity	-	2265
Acid value, so	16.5-23.5	mg KOH/g	2401
Viscosity, Physica, 2 s-1, 23°C	900 - 1200	mPa.s	2313
Viscosity, Physica, 20 s-1, 23°C	320 - 390	mPa.s	2313
Viscosity, Physica, 250 s-1, 23°C	200 - 230	mPa.s	2313
Solid, IR	61 - 63	%	2033
Gel time (from 25 to 35°C)	22 - 26	minutes	2625
Curing time (from 25°C to peak)	40 - 50	minutes	2625
peak temperature	95 - 125	°C	2625

Remarks and curing conditions
Viscosity measurement: TM 2313: Rotor Z2, 23°C. 25°C.
Curing Conditions, TM 2625: 2.0 grams of Butanox M-50 in 100 grams of resin.

Properties of liquid resins (typical values)

causality	(be) worth	unit (of measure)	TM
exterior condition	blue (color)	-	-
Density, 23°C	About 1100	kg/m3	2160
flash point	About 33	°C	2800
Storage period (uninitiated, dark, 25°C)	6	moon	-

Properties of cast unfilled resins (typical values)

causality	(be) worth	unit (of measure)	Test Methods
tensile strength	70	MPa	ISO 527-2
Tensile modulus of elasticity	3.7	GPa	ISO 527-2
Elongation at break	2.2	%	ISO 527-2
bending strength	125	MPa	ISO 178
Heat Distortion Temperature (HDT)	85	°C	ISO 75-Ae
Impact strength (without notch)	18	kJ/m2	ISO 179
barcolithic hardness	42	GYZJ 934-1	DIN EN 59
Density, 23°C	1170	kg/m3	DIN 53479
Volume shrinkage	6	%	-

Curing conditions
Cure with 1% Butanox M-50. Cure at room temperature for 24 hours. Then 24 hours at 70°C.

We offer our products for sale in mainland China (in compliance withRegulations on the Administration of Internet Sales of Hazardous Chemicals ) and some of the products of the global export services, providing dangerous goods packaging containers, "outbound dangerous goods transportation packaging use identification results list", "outbound cargo inspection and quarantine" and other export procedures.
We have rich experience in exporting hazardous chemicals, covering Class 5.2 (including products for cold chain transportation), Class 3 and Class 9 dangerous goods. Our services have been extended to more than 40 countries worldwide, including the Middle East, Central Asia and Eastern Europe.

AOC Synolite 5001-T-1 DCPD Halogen-free Flame Retardant Unsaturated Polyester Resin

Chemical/Physical Properties Synolite 5001-T-1 is a DCPD-based, thixotropic, non-halogenated, non-pre-promoted unsaturated polyester resin. Main Applications As part of a filled flame retardant resin system, it is suitable for hand coating, cold press molding, resin transfer molding, centrifugal casting and pultrusion molding. Key Properties The system offers high flame retardancy and low smoke emissions. The finished product has superior dimensional stability and electrical resistance characteristics. It can be colored using the full color palette, including white and pastel shades. Approvals NFP-92-501 M1NFF-16-101 F0DIN 4102 B1 (3-)

Be ready Worked with us?

We are committed to provide customers with customizable products and solutions to win the market through professional technology, fast process, efficient implementation, and become the best service provider in the new material industry.