AOC Synolite 5001-W-2 Halogen-free Flame Retardant Unsaturated Polyester Resin

Home " Product Center " AOC " AOC Synolite 5001-W-2 Halogen-free Flame Retardant Unsaturated Polyester Resin

Chemical/Physical Properties

Synolite 5001-W-2 is a flame retardant unsaturated polyester resin pre-promoted, thixotropic and filled.Synolite 5001-W-2 is a halogen free resin.

major application

Synolite 5001-W-2 is suitable for manual lamination and spray applications.

Main characteristics

Synolite 5001-W-2 exhibits significant fire resistance and very low smoke emissions.Synolite 5001-W-2 can be used in the construction, transportation, industrial and marine markets.

accreditation

Synolite 5001-W-2 meets the following criteria:

IMO Res. MSC 61(67) FTP Code Annex 1, Part 2: Smoke density, Dm < 200

IMO Res. MSC 61(67) FTP Code Annex 1, Part 2: Toxicity Testing

IMO Res. MSC 61(67) FTP Code Annex 1, Part 5: Heat generation

IMO Res. A 653(16) FTP Code MSC 61(67) Annex 1, Part 5: Surface Flammability

afnor nf p 92-501: m1

afnor nf f 16-101: f0

Product Delivery Specification

causality	realm	unit (of measure)	Test Methods
Solid Content, Infrared	77.5 - 81.5	%	2033
Gel time	20.0 - 25.0	minutes	2247
Viscosity, 20 s-1	900 - 1200	mPa.s	2313
Viscosity, 50 s-1	620 - 780	mPa.s	2313
Viscosity, 250 s-1	420 - 480	mPa.s	2313
Gel time from 25 to 35°C	35 - 50	minutes	2625
Cure Time from 25°C to Peak	51 - 70	minutes	2625
peak temperature	55 - 70	°C	2625
stability	> 60	minutes	2300°C

Remarks:
Viscosity Measurement: Physica MC1+ \ Z 2 \ 23°C
Curing conditions TM 2625 at 25°C: 0.5 g of B080 (DEAA) + 2.5 g of Butanox M50 mixed into 100 g of resin.

Properties of liquid resins (typical values)

causality	(be) worth	unit (of measure)	TM
exterior condition	pink (color)	-	2265
Density, 23°C	1620	g/cm3	2160
Stability, no initiator, in the dark, 20°C	4 months	-	-

Properties of cast unfilled resins (typical values)

causality	(be) worth	unit (of measure)	Test Methods
Heat Distortion Temperature (HDT)	> 90	°C	ASTM D648B

Curing conditions 3 hours after curing at 80°C.

working (of machinery)

Mix the product well before use. Due to its cure Synolite 5001-W-2 exhibits poor secondary behavior adhesion; wet-on-wet application is recommended for better adhesion. Curing between 15 and 30°C is recommended Moderately reactive MEKP. Post-curing at 80-90°C for 4 hours is recommended; styrene dilution should be avoided in order to maintain fire retardancy. Shelf life of the product after addition of the promoter (DEAA) not exceeding 24 hours.

Pre-use Guide

Prior to use, the resin should be conditioned in the well at a defined temperature relevant to the application (typically 15 °C minimum temperature for MEKP/Co cure). Stir the product before mixing.

We offer our products for sale in mainland China (in compliance withRegulations on the Administration of Internet Sales of Hazardous Chemicals ) and some of the products of the global export services, providing dangerous goods packaging containers, "outbound dangerous goods transportation packaging use identification results list", "outbound cargo inspection and quarantine" and other export procedures.
We have rich experience in exporting hazardous chemicals, covering Class 5.2 (including products for cold chain transportation), Class 3 and Class 9 dangerous goods. Our services have been extended to more than 40 countries worldwide, including the Middle East, Central Asia and Eastern Europe.

AOC Atlac? 430YT-901 Flame retardant corrosion resistant brominated vinyl ester resin

Flame Retardant Corrosion Resistant Brominated Vinyl Ester Resin Atlac? 430YT-901 is a brominated vinyl ester resin that offers excellent flame retardancy in addition to the excellent corrosion resistance and mechanical properties characteristic of traditional vinyl resins. Characteristic Properties Typical Applications Atlac? 430YT-901 resin can be used in environments where it is resistant to corrosion by a variety of acids, alkalis, bleaches and organic compounds. It is particularly suitable for chimneys and chimney liners in FRP piping systems. It is also suitable for equipment, construction panels and flooring materials that need to handle air and hot gas mixtures under non-combustible conditions. The resin is suitable for hand lay-up, spraying, winding, RTM and pulling.

Read More "

AOC Palatal? XF 9012 Halogen-free flame-retardant unsaturated polyester resin for pultrusion

The halogen-free flame-retardant unsaturated polyester resin Palatal? XF 9012 for pultrusion combines resin with aluminum hydroxide for composites with high flame retardancy and low smoke toxicity. Characteristic properties Product properties Palatal? XF 9012 is a halogen-free flame retardant resin with low viscosity and high reactivity. Typical applications Palatal? XF 9012 is a specially designed resin for pultrusion processes. the resin is not flame retardant, but due to its low viscosity it can be filled with large amounts of aluminum hydroxide and is therefore suitable for a wide range of environments where flame retardancy and smoke toxicity are required. palatal? XF 9012 is suitable for the production of various sizes of

Read More "

AOC Vipel? K022 Series Flame Retardant Bisphenol A Epoxy Vinyl Ester Resins

Flame Retardant Bisphenol A Epoxy Vinyl Ester Resin Properties of Pure Resin Casting Body (Typical Values) Properties AC Series CC Series CD Series CN Series E Series Tensile Strength (MPa) 86 83 83 76 86 Tensile Modulus (GPa) 3.6 3.6 3.6 3.7 3.5 Ductility at Fracture (%) 4.7 5.4 4.6 3 4.5 Flexural Strength (MPa) 147 143 143 143 143 138 149 Flexural Modulus (GPa) 3.7 3.7 3.7 3.9 3.7 Heat Deflection Temperature (℃) 116 112 112 11 143 138 149 Bending modulus (GPa) 3.7 3.7 3.7 3.9 3.7 Heat deflection temperature (℃) 116 112 112 11

Read More "

AOC Synolite 5001-T-1 DCPD Halogen-free Flame Retardant Unsaturated Polyester Resin

Chemical/Physical Properties Synolite 5001-T-1 is a DCPD-based, thixotropic, non-halogenated, non-pre-promoted unsaturated polyester resin. Main Applications As part of a filled flame retardant resin system, it is suitable for hand coating, cold press molding, resin transfer molding, centrifugal casting and pultrusion molding. Key Properties The system offers high flame retardancy and low smoke emissions. The finished product has superior dimensional stability and electrical resistance characteristics. It can be colored using the full color palette, including white and pastel shades. Approvals NFP-92-501 M1NFF-16-101 F0DIN 4102 B1 (3-)

Read More "

AOC Synolite 8175-W-1 Halogen-free Flame Retardant Unsaturated Polyester Resin

Non-Halogenated Flame Retardant Unsaturated Polyester Resin Components based on Synolite? 8175-W-1 have excellent flame retardancy, low smoke and toxicity properties Benefits Chemical/Physical Properties Synolite? 8175-W-1 is a pre-accelerated, thixotropic, and filled flame retardant unsaturated polyester resin. It is a non-halogenated resin. Applications Synolite? 8175-W-1 is designed to be easily manufactured using hand-lay-up, fiber-wound techniques. Components based on Synolite? 8175 W 1 have excellent flame retardant, low smoke and toxicity properties. It is recommended for construction and transportation flame retardant applications.

Read More "

AOC Palatal S 320T-954AT Additive Pre-promoted Thixotropic Flame Retardant Unsaturated Polyester Resin

Properties Brylon S 320T-954AT is an additive, pre-promoted, thixotropic flame retardant unsaturated polyester resin. With low smoke, low toxicity and high flame retardant technology, the resin has medium viscosity and medium reactivity. Main applications Brylon S 320T-954AT is characterized by high mechanical strength and good process performance, and is widely used in a variety of self-extinguishing reinforced and non-reinforced products, especially those with high requirements on fire resistance, such as architectural decorative panels, ventilation ducts, transportation tools (railroad vehicles, boats) and electric appliance housings and parts, etc. It is suitable for hand-laying, spraying, casting and other processes. Certification Oxygen index 38 GB/T 2406 Smoke density

Read More "

Be ready Worked with us?

We are committed to provide customers with customizable products and solutions to win the market through professional technology, fast process, efficient implementation, and become the best service provider in the new material industry.