SWANCOR 978 is a tackifiable vinyl ester resin for SMC (Sheet Molding Compound), BMC (Bulk Molding Compound) and HSMC (High Strength Molding Compound). It has excellent chemical resistance and mechanical properties. It has been widely used in sports equipment, automotive parts and corrosion resistant molding materials. Specifications Appearance Brown liquid Solid content 59.5±1.5% Viscosity*1 1950±250cps Acid value 20±5mgKOH/g S

SWANCOR 975 is a tackifiable, bisphenol A based vinyl ester resin for SMC (Sheet Molding Compound), BMC (Bulk Molding Compound) and HSMC (High Strength Molding Compound). It has excellent chemical resistance and mechanical properties. It has been widely used in sports equipment, automobile parts and corrosion resistant materials. Specification Appearance Light yellow liquid Solid content 56.5±1.5% Viscosity*1 2950±450cps Acid Value 23±5mgKOH/

SWANCOR CP95 is a special primer resin for concrete lining projects. It provides strong and firm adhesion on both sides, which results in a strong, heat- and corrosion-resistant interface after hardening; its surface also provides sufficient unsaturated chains to enable the re-coating to form a perfect lining design with SWANCOR CP95. Characteristics Appearance Light yellow transparent liquid Viscosity 100-300 cps (LVT#3-60 rpm/25℃) Gelation time 5-25 minutes (55% MEKPO: 1.2%, 6% Cobalt caprylates: 0.4%, 100% DMA: 0.05%, temperature: 25℃) Storage

SWANCOR CHEMPULSE 907 is a high performance phenolic vinyl ester resin with a light product color. In addition to excellent high-temperature corrosion resistance and oxidation resistance, it also has superior solvent resistance, and can effectively perform its characteristics at 180℃. Specifications Appearance: yellowish transparent liquid Density: 1.06±0.02kg/L Viscosity: 430±150 cps (LVT#3-60rpm/25℃) Solid content: 62±1.5% Gelation time: 15-25 minutes (55%MEKPO: 1.2%, 6% cobalt caprylate 0.4%, 100%DMA: 0.4%). 100%DMA: 0.5 TP3T, 100%DMA: 0.5 TP3T.

SWANCOR 1305 is a specially formulated accelerator for vinyl ester resins that exhibits good curing at low temperatures and high humidity. Advantages SWANCOR Resin Curability at Ambient Temperature Temperature Range Curing System SW 1305 MEKPO 20℃ 10~20min 2% 1.5% 20~30min 1.5% 1.5% ＞30min 1% 1.5% 25℃ 10~20min 1.5% 1.5% 20~30min 1.3% 1.5% 20~30min 1.5% 20~30min 1.5% 20~30min 1.5% 20~30min TP3T 20~30min 1.3% 1.5% ＞30min 1% 1.5% 30℃ 10~20min 1.

SWANCOR 983-M is a modified vinyl ester resin primer that combines the high toughness of elastomers with the physical properties of vinyl ester resins, the use of SWANCOR 983-M will produce the following benefits. Characteristics Appearance: brown semi-transparent layered liquid Gelding time*: 20-30 minutes (customized according to customer's request) Below 10℃, 55%MEKPO3phr; 11-19℃, 55%MEKPO1.5phr; Above 20℃, 55%MEKPO1.2phr.) Applicable substrate: Iron Shelf life: 2 months (under 25℃) ) Characteristics Adhesion Strength (ASTM D1002, Test Rate: 5mm)