Product Description::

• Norox? Pulcat AW is a peroxide solution for the pultrusion process, suitable for curing unsaturated and vinyl resins.
• It can also be used in room temperature cured resins where cobalt salts are employed as accelerators.

Typical Characteristics::

• The active oxygen content ranged from 8.71 TP3T to 9.01 TP3T.
• Appearance is a colorless liquid.
• The specific gravity at 25°C is 1.0.
• The viscosity at 25°C was 14.5 cps.
• Flash point is 60°C.
• Insoluble in water, but soluble in phthalates.

appliance::

• Norox? Pulcat AW exhibits high reactivity in the range of 60°C - 150°C. It has been shown to be highly reactive in the range of 60°C - 150°C.
• The recommended starting formula consists of 1.51 TP3T of Norox Pulcat AW and 11 TP3T of Norox? TBPB.
• Suitable for products that require color maintenance to avoid discoloration caused by the use of cobalt salt accelerators.

save::

• Recommended storage temperature is 80°F or lower.
• Avoid direct sunlight, heat, sources of ignition and combustible materials.
• When storage containers leak, they need to be dealt with quickly.

security measure::

• In case of eye contact, flush immediately with plenty of water; medical attention is required.
• For skin contact, wash with soap and water.
• When ingested, drink plenty of milk or water and seek immediate medical attention.
• Spills should be absorbed immediately and disposed of according to regulations.

fire (that burns buildings etc)::

• Peroxides may accelerate combustion upon ignition and need to be extinguished with a water mist nozzle.
• For small flames, carbon dioxide, foam or dry powder can be used to extinguish the fire.

Packaging and transportation::

• Standard package size is 48 lb. container, 44kg polyethylene bottles, 40lb or 20kg Hedpack.
• Classification and transportation information can be found on the Material Safety Data Sheet.
• Available through a national distribution network.