AOC Palatal? P 6-901 o-phenylene unsaturated polyester resin

Home " Product Center " AOC " AOC Palatal? P 6-901 o-phenylene unsaturated polyester resin

O-phenylene unsaturated polyester resin
Composite products based on Palatal? P 6-901 have good mechanical and thermal properties.

Good mechanical properties

Good heat resistance

Good chemical resistance

Product Properties

Palatal? P 6-901 is a general purpose o-phenylene unsaturated polyester resin with medium viscosity and high reactivity.

typical application

Palatal? P 6-901 is suitable for hand lay-up, winding and other processes. It has high mechanical strength and good heat and chemical resistance, and is widely used in a variety of non-reinforced as well as glass fiber reinforced products, such as pipelines, tanks, ships, automotive parts and other structural components.

Product Indicators

performances	numerical value	unit (of measure)	Test Methods
exterior condition	quiet	-	-
Solid content	64-67	%	TM 2265
Infrared Drying Viscosity	900-1200	mPa.s	TM 2033
acid value	29-33	mgKOH/g	TM 2013
Gel time	17-25	minutes	TM 2401
Curing time	21-30	minutes	TM 2625
exothermic peak	150-180	℃	TM 2625

Remarks:
Reactivity test: 1.0 g of Butanox? 44B (Nouryon) and 0.5 g of accelerator NL-49P (Nouryon) were added to 100 g of resin.

Typical Properties of Liquid Resins

performances	numerical value	unit (of measure)	Test Methods
refractive index	1.5325	-	TM 2150
23°C APHA color value	≤100	-	TM 2017
flash point	33	°C	TM 2800
storage period	6	moon	-

Typical Properties of Pure Resin Casting Body

performances	numerical value	unit (of measure)	Test Methods
tensile strength	90	MPa	ISO 527-2
tensile modulus	4.6	GPa	ISO 527-2
Tensile elongation at break	2.8	%	ISO 527-2
bending strength	150	MPa	ISO 178
bending modulus	4.6	GPa	ISO 178
heat distortion temperature	104	°C	ISO 75 Ae
Unnotched impact strength	9	kJ/m2	ISO 179

Remarks:
Curing conditions: room temperature curing 24 hours, curing after 80 ℃ 24 hours
Test conditions: temperature 23 ± 2 ℃, relative humidity 50 ± 5%

Process Operation Guide

The resin needs to be stored at a suitable temperature and humidity for a constant period of time before use, and the operating temperature should normally be above 15°C when using the MEKP/Co curing system;

Palatal? P 6-901 resin does not contain accelerators, cobalt accelerators should be added when used. MEKP can be used as curing agent. It should be ensured that the curing agent is within the validity period;

In order to make the natural molding surface of the product in contact with air not sticky after curing, it is recommended to add paraffin-styrene solution.

The shop temperature should be maintained between 18°C and 32°C, and the shop humidity should be maintained between 40% and 90%. Constant shop conditions will result in constant gel time and help manufacturers produce high quality products;

The final cured state of the product prior to use can be post-cured for a few hours at high temperatures (e.g. 80°C) to achieve optimum physical and chemical properties.

We offer our products for sale in mainland China (in compliance withRegulations on the Administration of Internet Sales of Hazardous Chemicals ) and some of the products of the global export services, providing dangerous goods packaging containers, "outbound dangerous goods transportation packaging use identification results list", "outbound cargo inspection and quarantine" and other export procedures.
We have rich experience in exporting hazardous chemicals, covering Class 5.2 (including products for cold chain transportation), Class 3 and Class 9 dangerous goods. Our services have been extended to more than 40 countries worldwide, including the Middle East, Central Asia and Eastern Europe.

AOC Palapreg? P 171-909 SMC/BMC o-phenylene-based resin

Palapreg? P 171-909 is an o-phenylene-based SMC/BMC molding resin designed for SMC/BMC production processes. It offers a good price/performance ratio for applications in automotive, electrical and building materials. Typical applications Palapreg? P 171-909 is designed for SMC/BMC production. Palapreg? P 171-909 has good flow properties for normal SMC/BMC products and is more suitable for injection molded BMCs and larger, complex products. Transportation products: Front circumference

Read More "

AOC Palatal? P 65-972 o-phenylene unsaturated polyester resin

Composite products based on Palatal? P 65972 resin offer good mechanical strength, good heat resistance and easy pultrusion processing. Benefits Chemical/Physical Properties Palatal? P 65-972 is an unsaturated polyester resin based on phthalic acid and standard diols dissolved in styrene. The resin has low viscosity and high reactivity. Applications Palatal?P 65-972 is designed for a wide range of FRP moldings with high resistance to heat distortion. Recommended for pultrusion, fiber-wound, RTM, high filler and polymer concrete. Product specification Attributes Values Single

Read More "

AOC Palatal? P61TV-956 N o-phenylene unsaturated polyester resin

Phthalic Resin for Hand Layup and Spraying Components based on Palatal P61TV-956 N have good non-stick properties and good curability when thin laminating in high humidity environments. Benefits Chemical/Physical Properties Palatal? P 61 TV-956 N is a pre-promoted, thixotropic unsaturated polyester resin based on phthalic acid and standard diols dissolved in styrene. The resin has low viscosity and high reactivity. A color change system has been used. Application Palatal P61TV-956N is well suited for hand lay-up and spray processes. It quickly soaks in during the lay-up process.

Read More "

AOC Palatal P 61TV-956L Pre-promoted thixotropic o-phenylene unsaturated polyester resin

Properties P 61TV-956L is a pre-promoted, thixotropic o-phenylene unsaturated polyester resin with low viscosity and high reactivity, suitable for hand lay-up and spraying processes. The resin contains a low styrene evaporator (LSE) and a color change indicator for the curing process. It has good wettability to glass fibers and excellent handling properties.P 61TV-956L has excellent mechanical properties and good water resistance. Main applications P 61TV-956L is widely used in hand lay-up and spraying processes. P 61TV-956L has low viscosity and very good wetting of glass fibers.P 61TV-956L

Read More "

AOC Synolite 0544-I-2 Pre-promoted thixotropic o-phenylene unsaturated polyester resin

Properties Synolite 0544-I-2 is a pre-promoted, thixotropic o-phenylene unsaturated polyester resin with low viscosity and medium reactivity. Main Applications Synolite 0544-I-2 has excellent mechanical properties, with elongation at break similar to most glass fiber reinforced materials, and can be used for structural parts where high mechanical properties are required. It is suitable for both hand lay-up and injection molding processes. 0544-I-2 has been certified by Lloyd's Register of Shipping as a marine resin. 0544-I-2 has been heat stabilized to withstand tropical temperatures and is suitable for use in hot water.

Read More "

AOC Palatal P 50-952TV is a pre-promoted thixotropic o-phenylene unsaturated polyester resin.

Properties P 50-952TV is a pre-promoted, thixotropic o-phenylene unsaturated polyester resin with low viscosity and high reactivity, suitable for hand lay-up and spraying. P 50-952TV has good infiltration of glass fibers and excellent handling properties, excellent mechanical properties and high impact strength. Main Applications Brylon P 50-952TV is widely used in hand lay-up and injection molding processes. P 50-952TV has low viscosity and very good infiltration of glass fiber, mainly used in shipbuilding industry, P 50-952TV has passed the inspection and approval of China Classification Society, it has good

Read More "

Be ready Worked with us?

We are committed to provide customers with customizable products and solutions to win the market through professional technology, fast process, efficient implementation, and become the best service provider in the new material industry.