AOC Palatal P 65TV-958 Pre-promoted thixotropic o-phenylene unsaturated polyester resin

Home " Product Center " AOC " AOC Palatal P 65TV-958 Pre-promoted thixotropic o-phenylene unsaturated polyester resin

Product Properties

P 65TV-958 is a thixotropic, pre-promoted general-purpose o-phenylene unsaturated polyester resin with low viscosity and high reactivity. In the resin
Contains wax solution.

major application

Byronic P 65TV-958 has low viscosity and very good infiltration of glass fibers, and is suitable for hand lay-up and spraying processes. The resin has good mechanical
Mechanical properties, shorter gel time. Good adhesion to both cast and extruded acrylic sheets. Low exothermic during curing, even if one-time
Laminated acrylic sanitary ware will not burn the acrylic sheet.
P 65TV-958 is particularly suitable for use with fillers, which can be used in quantities of up to 40-50phr, and is still suitable for injection processes.

Product Specification

performances	realm	unit (of measure)	Test Standards
exterior condition	turbidity	-	TM 2265
Viscosity 23℃	150-200	mPa.s	TM 2013
acid value	16-21	mgKOH/g	TM 2401
Solid content	53-58	%	TM 2033
Gel time 25-35℃	6-10	minutes	TM 2625

Note: Reactivity at 25°C: 2.0g Butanox M50 (AKZO-Nobel) in 100g resin

Liquid resin properties (typical values)

performances	numerical value	unit (of measure)	Test Standards
storage period (unsparked, dark place)	3	moon	-

Resin casting body properties (typical values)

performances	numerical value	unit (of measure)	Test Standards
tensile strength	70	MPa	ISO 527-2
Tensile modulus of elasticity	3600	MPa	ISO 527-2
Elongation at break	3.0	%	ISO 527-2
bending strength	130	MPa	ISO 178
Bending modulus of elasticity	3700	MPa	ISO 178
impact strength	10	KJ/m2	ISO 179
heat distortion temperature	65	℃	ISO 75A

Curing condition: 24 hours at room temperature, 24 hours after 80℃.
Test conditions: temperature 23±2℃, relative humidity 50±5%

Instructions for use and precautions

Curing agent can be used MEKP, the dosage is 1.0~2.5%. it should be ensured that the curing agent is within the validity period.

After long-term storage, the thixotropic agent in the resin will gradually settle, and must be dispersed evenly before use.

For better performance, the product can be post-cured at 80oC for several hours.

We offer our products for sale in mainland China (in compliance withRegulations on the Administration of Internet Sales of Hazardous Chemicals ) and some of the products of the global export services, providing dangerous goods packaging containers, "outbound dangerous goods transportation packaging use identification results list", "outbound cargo inspection and quarantine" and other export procedures.
We have rich experience in exporting hazardous chemicals, covering Class 5.2 (including products for cold chain transportation), Class 3 and Class 9 dangerous goods. Our services have been extended to more than 40 countries worldwide, including the Middle East, Central Asia and Eastern Europe.

AOC Palapreg? P 171-909 SMC/BMC o-phenylene-based resin

Palapreg? P 171-909 is an o-phenylene-based SMC/BMC molding resin designed for SMC/BMC production processes. It offers a good price/performance ratio for applications in automotive, electrical and building materials. Typical applications Palapreg? P 171-909 is designed for SMC/BMC production. Palapreg? P 171-909 has good flow properties for normal SMC/BMC products and is more suitable for injection molded BMCs and larger, complex products. Transportation products: Front circumference

Read More "

AOC Palatal? P 6-901 o-phenylene unsaturated polyester resin

O-phenylene unsaturated polyester resin Composite products based on Palatal? P 6-901 have good mechanical and thermal properties Characteristics Product properties Palatal? P 6-901 is a general-purpose o-phenylene unsaturated polyester resin with medium viscosity and high reactivity. Typical applications Palatal? P 6-901 is suitable for hand lay-up, winding and other processes. It has high mechanical strength and good heat and chemical resistance, and is widely used in a variety of non-reinforced as well as glass fiber reinforced products, such as pipes, tanks, ships, automotive parts and other structural components. Product index Performance Value Unit Test method

Read More "

AOC Palatal? P 65-972 o-phenylene unsaturated polyester resin

Composite products based on Palatal? P 65972 resin offer good mechanical strength, good heat resistance and easy pultrusion processing. Benefits Chemical/Physical Properties Palatal? P 65-972 is an unsaturated polyester resin based on phthalic acid and standard diols dissolved in styrene. The resin has low viscosity and high reactivity. Applications Palatal?P 65-972 is designed for a wide range of FRP moldings with high resistance to heat distortion. Recommended for pultrusion, fiber-wound, RTM, high filler and polymer concrete. Product specification Attributes Values Single

Read More "

AOC Palatal? P61TV-956 N o-phenylene unsaturated polyester resin

Phthalic Resin for Hand Layup and Spraying Components based on Palatal P61TV-956 N have good non-stick properties and good curability when thin laminating in high humidity environments. Benefits Chemical/Physical Properties Palatal? P 61 TV-956 N is a pre-promoted, thixotropic unsaturated polyester resin based on phthalic acid and standard diols dissolved in styrene. The resin has low viscosity and high reactivity. A color change system has been used. Application Palatal P61TV-956N is well suited for hand lay-up and spray processes. It quickly soaks in during the lay-up process.

Read More "

AOC Palatal P 61TV-956L Pre-promoted thixotropic o-phenylene unsaturated polyester resin

Properties P 61TV-956L is a pre-promoted, thixotropic o-phenylene unsaturated polyester resin with low viscosity and high reactivity, suitable for hand lay-up and spraying processes. The resin contains a low styrene evaporator (LSE) and a color change indicator for the curing process. It has good wettability to glass fibers and excellent handling properties.P 61TV-956L has excellent mechanical properties and good water resistance. Main applications P 61TV-956L is widely used in hand lay-up and spraying processes. P 61TV-956L has low viscosity and very good wetting of glass fibers.P 61TV-956L

Read More "

AOC Synolite 0544-I-2 Pre-promoted thixotropic o-phenylene unsaturated polyester resin

Properties Synolite 0544-I-2 is a pre-promoted, thixotropic o-phenylene unsaturated polyester resin with low viscosity and medium reactivity. Main Applications Synolite 0544-I-2 has excellent mechanical properties, with elongation at break similar to most glass fiber reinforced materials, and can be used for structural parts where high mechanical properties are required. It is suitable for both hand lay-up and injection molding processes. 0544-I-2 has been certified by Lloyd's Register of Shipping as a marine resin. 0544-I-2 has been heat stabilized to withstand tropical temperatures and is suitable for use in hot water.

Read More "

Be ready Worked with us?

We are committed to provide customers with customizable products and solutions to win the market through professional technology, fast process, efficient implementation, and become the best service provider in the new material industry.