Product Description:

• Norox? MEC FRED is a red mixture of methyl ethyl ketone peroxide and cyclohexanone peroxide containing diluent.
• This product is designed to be used as an initiator for unsaturated polyester resins, providing excellent curing properties at both low and ambient temperatures.
• The addition of red dye aids in mixing and indicates that proper curing is complete when the color fades.

Technical data:

• The active oxygen content does not exceed 9.0.
• The form is liquid and the color is colorless.
• The specific gravity at 25°C is 1.12 and the viscosity is 18.0 cps.
• Flash point is 170°F / 77°C (SETA C.C. method).
• Soluble in oxygenated organic solvents, slightly soluble in water.

Applications:

• Norox? MEC FRED is recommended as a gel and cure initiator for cobalt promoted unsaturated polyester resins at low operating temperatures.
• Compared to standard methyl ethyl ketone peroxide (MEKP) formulations, this product offers the following advantages:

• • • Reduced gel-to-cure time in many resins.
    • Less impact in cold conditions.
    • Excellent smoothness and consistency in the cure cycle.
    • Excellent storage stability due to the absence of impurities (water, hydrogen peroxide, unreacted methyl ethyl ketone and other diluents).
    • Enhanced performance with gelatin layers.

Comparison of technical data:

• • Experimental data on resin curing of Norox? MEC FRED with other products (Norox? MEKP-9 and Norox? MEKP-925) are provided.

Packaging, transportation and availability:

• • Standard package sizes for the product are 4x8 lb and 44 lb (20 kg) polyethylene bottles.
  • Available in pre-colored 44 lb (20 kg) bottles.
  • Refer to the specific Norox? MEC FRED Safety Data Sheet (SDS) for product classification, transportation and regulatory information.
  • Users can obtain worldwide distributor information for the product by contacting United Initiators, Inc.

The documentation emphasizes that the use of its technical data is for information purposes and does not constitute a guarantee of the characteristics or suitability of the product, and the user should verify the suitability of the product by himself. The application and use by the user is based on technical advice and is not under the control of the manufacturer. The manufacturer does not guarantee the performance and quality of the product and reserves the right to make any changes in accordance with technological advances and company developments.