Product Information:

• Product name: NOROX? 500-90-AL3
• Chemical composition: 1,1-Bis(tert.butyl peroxy)3,3,5-trimethyl cyclohexane
• CAS No.: 6731-36-8
• Molecular mass: 302.4 g/mol
• 90% concentration of aliphatic (aliphatics) solution

Product Description:

• Appearance: colorless liquid
• Peroxide content: approx. 90% w/w
• Active Oxygen Content: Approx. 9.5% w/w
• Desensitizer: High-boiling-point alefaceptic
• Density (20°C): approx. 0.892 g/cm3
• Viscosity (20°C): approx. 17 mPa-s
• Refractive index (20°C): approx. 1.438
• SADT: approx. 60°C
• Refrigeration stability: below -25°C
• Recommended storage temperature: below 30°C
• Storage stability from date of delivery: 6 months

Product Applications:

• Vinyl: Initiator for high-pressure ethylene polymerization, suitable for use in combination with other different reactive peroxides.
• Styrene: Used in the polymerization of styrene, suitable for block or solution polymerization, as well as copolymerization with other monomers such as butadiene and acrylonitrile.
• Other monomers: Used in the polymerization of vinyl acetate and (meth)acrylate.

Standard Packaging:

• HDPE drum, 25 kg per drum

Disclaimer:

• The information and technical advice provided is based on in-house testing of local raw materials and is intended to provide information on their products and applications.
• The information should not be construed as a guarantee of specific performance of the products described or of their suitability for a particular application, nor does it provide complete instructions for use.
• The information does not provide a guarantee for the product and shelf-life characteristics, nor does it provide any responsibility or liability for the intellectual property rights of third parties, in particular patents.
• We reserve the right to make any changes based on technological advances or further developments.
• The application and use of products based on our technical advice is beyond our control and is entirely the responsibility of the user.
• The user is obliged to carefully inspect and test incoming products to verify their suitability for the intended application.