Product Description:
- Product Name: EHPC-60-ENF2
- Chemical composition: 1,1-bis(2-ethylhexyl) peroxydicarbonate
- Form: White (non-freezing) emulsion
- Uses: Used as free radical initiator for monomer polymerization, mainly used in the polymerization of vinyl chloride (VCM).
Technical data:
- Appearance: white emulsion
- Inhibitor: water/methanol
- Content: Approx. 60% weight/weight
- Active Oxygen (AO): approx. 2.77% w/w
- Density (20°C): approx. 0.98 g/cm3
- Viscosity (20°C): approx. 200 mPa-s
- Flash point: 31°C
- SADT: approx. 0°C
- Refrigeration stability: approx. -25°C
- Recommended storage temperature: -20°C
- Maximum transportation temperature: -20°C
- Storage stability after delivery: 3 months
- Standard package: 1100 kg in stainless steel IBCs
Typical Applications:
- Initiator for suspension and microsuspension polymerization of vinyl chloride (VCM).
- Temperature range: 45 - 60°C
- Dosage level: 0.05 - 0.2%
- Advantages: liquid, easy dosing and high activity.
- Constant polymerization rates can be achieved in combination with other thermally stable peroxides such as decanoyl peroxide.
Decomposition products:
- Possible decomposition products detected: carbon dioxide, 2-ethylhexanol
Storage:
- Avoid heat, light, and humidity to protect the product from impurities.
- Stay within safe temperature limits.
Disclaimer:
- This information is based on United Initiators' internal research and development and experience and is provided for informational purposes only.
- United Initiators disclaims all warranties, express or implied, with respect to the information provided, including the specific attributes of the products, their suitability, and complete instructions for use.
- United Initiators makes no warranty regarding product or shelf life attributes and is not responsible for the legality of the information used.
- United Initiators reserves the right to make any changes based on technological advances or further developments.
- The application and use of products based on technical advice is not under the control of United Initiators and is the sole responsibility of the user. The user is obliged to carefully inspect and test incoming products to verify their suitability.