Product Information
- Product Name: EHPC-60-ENF1
- Chemical composition: Di-2-ethylhexyl peroxydicarbonate
- Form: white emulsion containing 60% Di-2-ethylhexyl peroxydicarbonate, desensitized with water and methanol
- Main applications: used as free radical initiator for monomer polymerization, mainly for the polymerization of vinyl chloride (VCM)
- Temperature range: 45 - 60°C
- Recommended dosage: 0.05 - 0.2%
Technical data
- Form: white emulsion
- Desensitizer: water/methanol
- Content: approx. 60% (mass %)
- Active Oxygen Content: approximately 2.771 TP3T (% by mass)
- Density (20°C): approx. 0.98 g/cm3
- Viscosity (20°C): approx. 200 mPa-s
- Flash point: 31°C
- SADT: approx. 0°C
- Refrigeration stability: approx. -25°C
- Recommended storage temperature: -20°C
- Maximum transportation temperature: -20°C
- Storage stability from date of delivery: 3 months
Standard Packaging
- Non-freezing emulsion: 1100 kg stainless steel IBC
- 25kg HDPE drum
Half-life data
- 10 hours/1 hour/1 minute (benzene, 0.1 mol/L): 41°C/57°C/90°C
statement denying or limiting responsibility
- The technical data and recommendations are based on the knowledge and experience of the manufacturer and do not provide a guarantee for product characteristics, suitability or complete instructions for use.
- Product and shelf life performance is not warranted.
- Use of this information is at the user's responsibility and risk, and it is the user's responsibility to check and test the suitability of the product.
- No liability is assumed for intellectual property rights, especially patents.
appliance
- Initiator for suspension and microsuspension polymerization of vinyl chloride (VCM).
- In combination with other thermally stable peroxides (e.g., dilauroyl peroxide), a constant rate of polymerization can be achieved.
decomposition product
- Possible decomposition products detected: carbon dioxide, 2-ethylhexanol
stockpile
- Avoid heat, light, and humidity to protect the product from impurities.
- Keep within a safe temperature range.