Product Information

• Product Name: EHPC-50-ENF1
• Chemical composition: Di-2-ethylhexyl peroxydicarbonate
• Form: white emulsion containing 50% Di-2-ethylhexyl peroxydicarbonate, desensitized with water and methanol
• Main applications: used as free radical initiator for monomer polymerization, mainly for the polymerization of vinyl chloride (VCM)
• Temperature range: 45 - 60°C
• Recommended dosage: 0.05 - 0.2%

Technical data

• Form: white emulsion
• Desensitizer: water/methanol
• Content: approx. 50% (mass %)
• Active Oxygen Content: approximately 2.311 TP3T (% by mass)
• Density (20°C): approx. 0.93 g/cm3
• Viscosity (20°C): approx. 150 mPa-s
• SADT: approx. 5°C
• Refrigeration stability: approx. -25°C
• Recommended storage temperature: -20°C
• Maximum transportation temperature: -20°C
• Storage stability from date of delivery: 3 months

Standard Packaging

• Non-freezing emulsion: 1100 kg stainless steel IBC
• 25kg HDPE drum

Half-life data

• 10 hours/1 hour/1 minute (benzene, 0.1 mol/L): 41°C/57°C/90°C

statement denying or limiting responsibility

• The technical data and recommendations are based on the knowledge and experience of the manufacturer and do not provide a guarantee for product characteristics, suitability or complete instructions for use.
• Product and shelf life performance is not warranted.
• Use of this information is at the user's responsibility and risk, and it is the user's responsibility to check and test the suitability of the product.
• No liability is assumed for intellectual property rights, especially patents.

appliance

• Initiator for suspension and microsuspension polymerization of vinyl chloride (VCM).
• In combination with other thermally stable peroxides (e.g., dilauroyl peroxide), a constant rate of polymerization can be achieved.

decomposition product

• Possible decomposition products detected: carbon dioxide, 2-ethylhexanol

stockpile

• Avoid heat, light, and humidity to protect the product from impurities.
• Keep within a safe temperature range.