Product Information: Product Name: NOROX? KP-9 Ingredients: Methyl ethyl ketone peroxide Form: Liquid mixture Main Application: Used with cobalt accelerators to cure unsaturated polyester resins at room temperature Technical Data: Appearance: Colorless and transparent liquid Reactive Oxygen Content: 9.0 - 9.21 TP3T Free Hydrogen Peroxide Content: 1.6 - 1.81 TP3T Moisture Content: 1.51 TP3T Flash point: > 80°C Density (20°C): 1.12 - 1.15 g/cm3 Viscosity (20°C): 9 - 15 mPa.s Solubility: soluble in oxidizing organic solvents, slightly soluble in water Critical temperature

Product Description: NOROX? KP-200 is a ketone ethyl ketone peroxide used as a curing agent for unsaturated polyester resins in combination with cobalt accelerators at room temperature. Technical Data: Appearance: Colorless transparent liquid Active Oxygen Content: 9.5% pH: 4 - 7 Density (20°C): 1.12 - 1.16 g/cm3 Flash Point (Seta Flash Point Method): > 60°C Solubility: Oxidizing Organic Solvents, Slightly Soluble in Water Critical Temperature (SADT): 60°C Recommended Storage Temperature: 30°C max. The period of maintenance of activity at 30°C is 6 months from the date of delivery.

Product Description: Product Name: NOROX ? KP-100 Chemical Composition: Methyl ethyl ketone peroxide Main Applications: For curing unsaturated polyester resins with cobalt accelerators at room temperature Appearance: Colorless transparent liquid Reactive Oxygen Content: 9.7 ± 0.1% Temperature Characteristics: SADT 65°C Recommended Storage Temperature: not exceeding 30°C Shelf Life: 6 months from delivery date Areas of application: Suitable for a wide range of processes: hand lay-up, spraying, RTM, continuous lamination, centrifugal casting, fiber winding and polyester concrete NOROX ? KP-100 is the general purpose MEKP for speed-demanding applications.

Product Description: NOROX ? HDP-75 Product Name: NOROX ? HDP-75 Chemical Composition: Methyl ethyl ketone peroxide/Hydrogen peroxy tert-butyl toluene Primary Use: Liquid polymerization initiator for curing specialty unsaturated polyester and vinyl ester resins at room temperature Product Advantages/Properties: Lower Peak Exotherm Longer Operational Time (Gel Time) Eliminates "Leading Edge Effect" prevalent with other peroxides in VRTM applications. "Leading Edge Effect" Faster initial strength than other tert-butyltoluene hydroperoxide blends Excellent final cure Eliminates the need for in-plant mixing of peroxides Reduced foaming potential when used with vinyl esters for penetration processes

Product Description: Product Name: NOROX ? FS-100/9 Chemical Composition: Methyl ethyl ketone peroxide (MEKP) Main Uses: Mainly used in highly filled resin systems with high hydrogen peroxide content to provide rapid gelation and initial strength development. Not recommended for gelatin coatings or vinyl ester resins. TECHNICAL DATA: Reactive Oxygen Content: Not to exceed 9.01 TP6T APPEARANCE: Liquid COLOR: COLORLESS TRANSPARENT Specific Gravity at 25°C: 1.16 FLASH POINT (C.O.C.): Not less than 200°F/93°C FLASH POINT (SETA C.C.): Not less than 170°F/76°C SPONSORED DECOMPOSITION TEMPERATURE (SAD)

NOROX?ENP-92 FRED Chemical name: Methyl ethyl ketone peroxide CAS No.: 1338-23-4

Product Description: Product Name: NOROX? ENP-92 Chemical Composition: Methyl ethyl ketone peroxide (MEKP) Appearance: Colorless, flowable liquid containing a methyl ethyl ketone based peroxide that is desensitized by means of a fatty ester. This ketone peroxide is used as initiator (free radical source) in the curing of unsaturated polyester resins. Main application: At room temperature with small amounts of cobalt accelerators for casting buttons or when centrifugally casting button plates. Technical data: Reactive oxygen content: approx. 9.91 TP6T (mass fraction) Desensitizer: Fatty ester Density (20°C): approx. 1.04 g/cm3 Viscosity at 20°C: approx. 21 mPa-s with water not

Product Description: Product Name: NOROX? ENP-90 FRED Chemical Composition: Methyl ethyl ketone peroxide (MEKP) Appearance: Red, flowing liquid containing a methyl ethyl ketone based peroxide, desensitized by means of a fatty ester. This ketone peroxide is used as initiator (free radical source) in the curing of unsaturated polyester resins. Special advantage: Due to the red peroxide, homogenization in the resin can be controlled and the red color disappears after curing. Highly efficient in special pre-accelerated and stabilized resin types. Main applications: Curing of molded parts at room temperature together with cobalt accelerators. Technical Data: Appearance: Red Liquid Active Oxygen

Product Description: Product Name: NOROX? ENP-90 Chemical Composition: Methyl ethyl ketone peroxide (MEKP) Appearance: Colorless, transparent liquid containing a methyl ethyl ketone based peroxide, desensitized by fatty esters. This ketone peroxide is used as initiator (free radical source) in the curing of unsaturated polyester resins. Main application: In combination with cobalt accelerators for the curing of molded parts at room temperature. Advantages: High efficiency in special pre-accelerated and stabilized resin types. Technical Data: Appearance: Colorless Transparent Liquid Reactive Oxygen Content: 8.6 - 9.2% Flash Point (Seta Closed Cup Method): > 77°C Density (