Product Information: Typical Properties: Storage and Handling: First Aid: Spillage and Fire: Packaging and Transportation: Other Precautions:

Superox? 688 Product Description Typical Properties Storage Handling First Aid Leakage Fire Packaging, Transportation and Access Additional Information

Superox? 7 is a general purpose methyl ethyl ketone peroxide primarily used to cure unsaturated polyester resins in combination with accelerators at room temperature. It is suitable for a wide range of processes including hand lay-up, spraying, casting, winding and vacuum introduction. The following are the main contents of the document: Product properties: Storage and handling: Handling and first aid: Spillage and fire: Packaging, transportation and means of access:

Product Description: Typical Properties: Application: Storage: Safety Measures: Fire: Packaging and Transportation:

LP-40-SAQ2 Chemical name: Dilauroyl peroxide CAS No.: 105-74-8

Product Information: Product Name: DYBP-85-WO Chemical Name: 2,5-Dimethyl-2,5-di-tert-butylperoxyhexyn-3 CAS No.: 1068-27-5 Appearance: Pale Yellow Liquid Contains approx. 85% of technically pure 2,5-Dimethyl-2,5-di(tert-butylperoxy) hexyne-3 with the addition of 15% of white oil to minimize reactivity. This bifunctional dialkyl peroxide is used as a free radical initiator in crosslinking of polyethylene at temperatures above 180°C. The product has been developed for use as a free radical initiator. Technical Data: Appearance: light yellow liquid Sensitizer: white oil Content: approx. 85% w/w Density (20°C): approx. 0.88 g/cm3

Product Information: Product Name: DYBP (2,5-dimethyl-2,5-bis(peroxy-tert-butyl)-3-hexyne) CAS No.: 1068-27-5 Appearance: Pale Yellow Liquid Contains approx. 95% technical purity 2,5-dimethyl-2,5-bis(peroxy-tert-butyl)-3-hexyne This bifunctional dialkyl peroxide is used as a free radical initiator for crosslinking of polyethylene at temperatures above 180°C. It can be used as a free radical initiator for crosslinking polyethylene. This bifunctional dialkyl peroxide is used as a free radical initiator for crosslinking of polyethylene at temperatures above 180°C. Technical Data: Appearance: light yellow liquid Content: approx. 951 TP6T w/w Active oxygen: approx. 10.61 TP6T w/w No desensitizer Density (20°C): approx. 0.889 g/cm

Product Information: Product Name: TBPA-50-AL1 (tert-butyl peroxyacetate) CAS No.: 107-71-1 Appearance: Colorless to light-colored liquid Contains approx. 50% w/w of tert-butyl peroxyacetate using aliphatic hydrocarbons (oleyl hydrocarbons) for the sensory reducing agent. Technical Data: Appearance: Colorless to light-colored liquid Peroxide content: approx. 50% w/w Reactive oxygen: approx. 6.1% w/w Sensitizer: Aliphatic hydrocarbons (Boiling point > 170°C) Density (20°C): approx. 0.84 g/cm3 Viscosity (20°C): approx. 1 mPa-s Refractive index (20°C): approx. 1.4

Product Information: Product Name: TBPIB-50-AL (tert-butyl peroxyisobutyrate) CAS No.: 109-13-7 Molecular Mass: 160.2 g/mol 50% Concentration, soluble in aliphatic hydrocarbons Product Description: Appearance: Colorless flowing liquid Contains approximately 50% w/w tert-butyl peroxyisobutyrate, using aliphatic hydrocarbons for the sensory reducing agent. Technical data: Appearance: Colorless liquid Peroxide content: approx. 50% w/w Reactive oxygen: approx. 5.04% w/w Sensitizer: Aliphatic hydrocarbons Density (20°C): approx. 0.82 g/cm3 Viscosity (20°C): approx. 1 mPa-