Luperox? 11M75 polymer initiator is a 75% active weight solution of tert-butyl peroxypivalate that can be used in the polymerization of ethylene to make LDPE or in the synthesis of fluoropolymers.

Luperox? 11M75 HP is a 75% solution of tert-butyl peroxypivalate in isododecane of high organic purity.

Luperox? 11M75 E is a solution of tert-butyl peroxypivalate of 75% in isododecane.

Luperox? 11M75 (low water) is a 75% solution of tert-butyl peroxyneopentanoate in isododecane of high organic purity with low water content.

Luperox? 11M45 polymer initiator is a lower active concentration formulation of tert-butyl peroxypivalate.

Luperox? 11M40 polymer initiator is a lower active concentration formulation of tert-butyl peroxypivalate.

Luperox? TAEC polymer initiator is a tertiary amyl initiator for the synthesis of expandable polystyrene. The non-aromatic chemistry makes it a good alternative to tert.Butylperoxybenzoate in food contact applications. Luperox? TAEC also produces a very effective free radical that improves monomer conversion, reduces residual styrene and improves grafting efficiency.

When used to crosslink ethylene vinyl acetate (EVA) polymers, Luperox? TBEC polymer initiator offers good thermal stability, crosslinking efficiency and short cure times. Luperox? TBEC can also be used for food contact styrene polymerization because it produces non-aromatic fragments upon decomposition.

40% Calcium carbonate and silica powder