Luperox? 610EN50 emulsion initiator is a very active initiator for the suspension polymerization of vinyl chloride to form PVC resins. The very short half-life of Luperox? 610EN50 emulsion initiator improves the conversion of vinyl chloride monomer, thereby increasing reactor efficiency. This efficiency is well demonstrated in resins with K values greater than 65.

Luperox? 610 polymer initiator improves productivity by increasing conversion and can be used in the polymerization of vinyl chloride.

Luperox? 610M50 is a 50% solution of 3-hydroxy-1,1-dimethylbutyl peroxyneodecanoate in isododecane.

Luperox? 575 polymer initiator is a tertiary amyl initiator typically used in the production of acrylic resins. The low-energy free radicals generated during decomposition help improve monomer conversion while providing low polydispersity and solution viscosity in the finished resin.

Luperox? 575M75 polymer initiator is a 75% active weight tertiary amyl peroxide (2-ethylhexanoate) formulation.

Luperox? CU80 polymer initiator is used in composite applications with polyester or acrylic resins. Recommended for medium to high curing temperatures where slow gelation and low exotherm are required, especially for highly reactive resins.

LUPEROX? CU48 is a 48% hydroperoxyisopropylbenzene and a small amount of isopropylbenzene diluted in mineral oil.

Luperox? 570 is an industrially pure tert-pentyl peroxy 3,5,5-trimethylhexanoate of 96%.

Luperox? 554M75 polymer initiator is a tertiary amyl organic peroxide used in the manufacture of LDPE, PVC and acrylic resins. Luperox? 554M75 polymer initiator generates a large number of low-energy free radicals. This feature makes it a viable alternative to azo initiators.