完结小说,怎么写网络小说

Home " Product Center

AOC Palapreg P18-03 SMC/BMC Molding Resin

Chemical/Physical Properties Palapreg P18-03 is an unsaturated polyester resin derived from maleic acid and glycol, dissolved in styrene. The resin has medium viscosity and high reactivity. Primary Applications Palapreg P18-03 is recommended to be formulated with high polymer solutions (e.g., Palapreg H850-01, H852-03, Palapreg H 1080-01, etc.) for the production of low protrusion and Class A applications, as well as high quality, low shrinkage (H814-01) SMC/BMC parts. Formulations based on P18-03 can be used in a wide range of applications with high surface quality, low separation and modified

Learn more "

AOC PALAPREG? P 17-02 Low Bump Float SMC/BMC Molding Resin

Chemical/Physical Properties Palapreg? P 17-02 is an unsaturated polyester resin derived from phthalic acid and standard ethylene glycol, dissolved in styrene. Palapreg? P 17-02 has medium viscosity and high reactivity. Main applications Palapreg P 17-02 is used in the production of SMC and BMC. It is mainly used with Palapreg polymer components for SMC/BMC applications with low shrinkage or low bulge. The resin is easy to thicken easily by magnesium oxide. Product specification as delivered Attributes Range Units Test method Viscosity, 23°C 1300 -

Learn more "

AOC PALAPREG? H 852-03 Low Shrinkage Additive for SMC/BMC with Low Surface Bump Float Grade A

Chemical/Physical Properties Palapreg? H 852-03 is a modified saturated polyester solution dissolved in styrene. Main applications For example, the combination of Palapreg? P18-03 and Palapreg? H852-03 is recommended for the production of low relief SMC/BMC parts with high surface quality (class A). The formulation can be easily thickened with magnesium oxide. Due to its excellent flowability in SMC, Palapreg? H 852-03 is well suited for low pressure applications. The use of aluminum hydroxide as a filler allows the production of molded products with high flame retardancy. Criteria Comments

Learn more "

AOC Palapreg H 892-02 Low Shrinkage Additive for SMC/BMC with Grade A Surface

Product Properties Brylon H 892-02 is a low shrinkage additive for Grade A surface SMC / BMC. It has very low resin viscosity and excellent system shrinkage control. Main Applications H 892-02 is well suited for A-grade surface products or products with high surface brightness. Shrinkage can be controlled to zero or negative, making it suitable for a wide range of products that require shrinkage or surface quality. At the same time, H 892-02 has very good heat resistance, water resistance and weather resistance, which can meet the requirements of some special products. Automobile parts: all kinds of automobile exterior parts Electronic and electrical appliances: motor molded parts, precision injection parts Others:

Learn more "

AOC Palatal A 400-976A m-phenylene food-grade unsaturated polyester resin

Properties Balance Material A 400-976A is a m-phenylene type unsaturated polyester resin with medium viscosity and high reactivity. Belomate A 400-976A is a food grade resin, which meets the requirements of "Hygienic Law of the People's Republic of China on Unsaturated Polyester Resin and Glass Reinforced Plastic Products for Food Containers and Packaging Materials" (GB 13115-1991). Main applications Brylon A 400-976A is suitable for pipes, tanks, automobile parts, ships, counter molds and other molded products requiring high mechanical properties. It can be used in hand lay-up, winding, RTM and pultrusion, casting grid and other molding processes. Product Specification Performance Range Units Testing

Learn more "

AOC ATLAC? E-NOVA FW 2045 Modified Epoxy Bisphenol A Vinyl Ester Polyurethane Resin

Chemical/Physical Properties Atlac? E-Nova FW 2045 is a modified epoxy bisphenol A vinyl ester polyurethane resin dissolved in styrene. Primary Applications Atlac? E-Nova FW 2045 can be used in all fabrication methods, but is particularly well suited to meet the requirements of fiber wrap, centrifugal casting, hand lamination and spray applications. Atlac? E-Nova FW 2045 offers the same excellent thermo-chemical resistance to solvents, acids and oxidizing media as epoxy phenolic vinyl esters, as well as alkali resistance. E-Nova technology combines the processing ease of polyester with the vinyl ester's

Learn more "

AOC Vipel? K022 Series Flame Retardant Bisphenol A Epoxy Vinyl Ester Resins

Flame Retardant Bisphenol A Epoxy Vinyl Ester Resin Properties of Pure Resin Casting Body (Typical Values) Properties AC Series CC Series CD Series CN Series E Series Tensile Strength (MPa) 86 83 83 76 86 Tensile Modulus (GPa) 3.6 3.6 3.6 3.7 3.5 Ductility at Fracture (%) 4.7 5.4 4.6 3 4.5 Flexural Strength (MPa) 147 143 143 143 143 138 149 Flexural Modulus (GPa) 3.7 3.7 3.7 3.9 3.7 Heat Deflection Temperature (℃) 116 112 112 11 143 138 149 Bending modulus (GPa) 3.7 3.7 3.7 3.9 3.7 Heat deflection temperature (℃) 116 112 112 11

Learn more "

AOC Vipel? F013 Series Bisphenol A Epoxy Vinyl Ester Resins (High Styrene Content Version)

Bisphenol A Epoxy Vinyl Ester Resins (High Styrene Content Versions) Product Description AOC Vipel? F013 Series is a styrene-soluble bisphenol A epoxy vinyl ester resin.Vipel? F013 Series is ideally suited for use in hand lay-ups, spraying, fiber wrapping, and pultrusion processes, where it offers excellent mechanical properties, resistance to chemicals, and good heat resistance.Vipel? F013 Series has the best resistance to hot alkali corrosion. Vipel? F013 series offers the best resistance to heat and alkali corrosion. Main Applications The Vipel? F013 series is suitable for products subjected to particularly high static or dynamic loads, such as pipes, tanks, ducts and flooring applications. Performance characteristics

Learn more "

AOC Synolite? 0740-P-915 Bathroom Structural Layer Resin

Bathroom Structural Layer Resin Synolite? 0740-P-915 is a thixotropic, pre-promoted general purpose o-phenylene unsaturated polyester resin with low viscosity and medium reactivity. The resin is wax-free. Characteristic properties Synolite? 0740-P-915 has a low viscosity and very good wetting of glass fibers, which makes it suitable for hand lay-up and spraying processes. Low exothermic during curing, even one-time layer molding of acrylic sanitary ware will not burn the acrylic sheet. With low shrinkage, light color and low odor, Synolite? 0740-P-915 is particularly suitable for the addition of fillers, and at high filler ratios it is still suitable for injection molding.

Learn more "

Be ready Worked with us?

We are committed to provide customers with customizable products and solutions to win the market through professional technology, fast process, efficient implementation, and become the best service provider in the new material industry.